WEED-IT Quadro: various modes

WEED-IT can be used in various modes:

  • Spot spraying;
  • Full coverage;
  • Dual function (spot & coverage).

To change the spraying mode:

  1. Stop the vehicle.
  2. Enter the Service mode. The global information screen opens:

  3. Press briefly a number of times, until menu 104 opens:

    1. Press the Mode function key to select the PWM mode you wish to use.
    2. Adjust the available parameters to match your nozzle type and preferred spray rates.
    3. Press OK to confirm. All sensors are reconfigured and the system restarts.
    Read more about setting the nozzle cap type
    pijltje-klein-roze-down Created with Sketch.