Follow these Steps

Follow the steps below if you have replaced nozzle cap types on the WEED-IT by a new type:

  1. Stop the vehicle.
  2. Enter the Service mode.
  3. Press briefly a number of times, until menu 104 opens:

  4. Use theUp/Down navigation keys to select the nozzle parameter, if necessary.
  5. Use the Left/Right navigation keys to select the appropriate nozzle type.
  6. Press OK to confirm. All sensors are reconfigured and the system restarts.

Only use the nozzle types that you can select in the software.
The nozzle type is usually engraved in the top surface of the nozzle.

Read more about changing the application rate & the margin
pijltje-klein-roze-down Created with Sketch.