Main menu and Service mode

  • Main menu: This is the default mode. With the main screen open, briefly press to navigate through available menus. If no key is pressed for 3 seconds, the system takes you back to the Main screen. Refer to "Main menu options" on page 34 for more information on available options
  • Service mode: Use this mode to check and/or change system settings. Press and hold for 1 second to enter the service mode. Go to "Service mode" for more information on available options.

Pressure check

Before each use, check system pressure by briefly flushing the WEED-IT system:

  1. Switch on the system.
  2. Press the Flush key:

  3. Check that the pressure is 3.0 bar (43.5 psi). The top right of the Control Panel shows the pressure.
Please note:If the machine has been in storage for a longer period of time, the pressure may be higher. After flushing the system, the pressure should return to the regular 3.0 bar (43.5 psi).
Read more about Sensors check
pijltje-klein-roze-down Created with Sketch.